Temperature and humidity Sensor

Item No.: AV2010/27A

Smart Home System Weather station: the temperature and humidity sensor displays readings on the screen and transmits them to the smart home system. Suitable for controlling smart home situations for heating and ventilation.


  • Temperature and humidity Sensor
  • Double-sided Adhesive strips
  • 2x 1.5 V Alkaline batteries standard AA type
  • Quick Guide
  • Installation Accessories


The sensor is suitable for indoor use and in the protected outdoor area. Screws and nozzles are included for the fixed installation, as well as a double-sided adhesive strip.


To use this product, you need a Smart Home system that supports ZigBee wireless protocol.

  • Open the sensor by loosening the screw and lifting the lid. Use the batteries (1.5 V AA Alkalie) According to the polarity indicated.
  • Follow the instructions in the Connection Wizard to add new devices that you will find in your Smart Home system's application or Web interface.
    If the Connection Wizard is unavailable, do the following:
    1. Put the Smart Home system in connection mode to add new devices.
    2. Hold the function button on the side of the sensor for about 10 seconds until the display lights are off.
    3. Once an antenna icon appears on the screen, the device is successfully logged on to your Smart Home system.

Reset or re-learn:

To use the sensor in another system or when replacing the gateway or radio device, it is sufficient to follow the process of adding new devices to your system. Once the installation process has been successfully completed, the sensor will no longer connect to the system in which it was previously registered.


By briefly pressing the function button, the display light lights up for 15 seconds and the current temperature and humidity values are transferred to the smart home system. At rest, the values are transmitted every 10 minutes or immediately if a change in temperature of 2% or a change of humidity of 10% occurs. The bridge allows you to set the unit for temperature measurement: C for degrees Celsius (factory setting) and F for Fahrenheit.

Customer Service

In case of connection problems, please use SMaBiT smart plugs, repeaters or wall-mount relays in order to increase the range of the ZigBee radio network. For further information and for product support, please consult


Technical data

  • Temperature and humidity Sensor
  • Operating temperature/Sensor range:-25 °c to + 50 °c
  • Suitable for outdoor protected use, IP44
  • Humidity: Up to 90% non-condensing
  • Blue LED Backlight Display
  • Change the display between Celsius and Fahrenheit
  • Power: 2x 1.5 V AA Alkalie Battery
  • Battery life: About 2 years
  • Dimensions 90 x 90 x 24 m
  • Weight without batteries 92 g
  • ZigBee Standard Radio HA 1.2, 2.4 GHz

Legal Notices

Made in Taiwan.